HID Attack Over WiFi Using Arduino MKR1000 Arduino MKR1000 as a HID, for performing HID penetration testing over WiFi networks. Things used in this project Hardware components Arduino MKR1000 × 1 Story Arduino MKR1000 Today I have an Arduino MKR1000 which is a board with built-in wifi chipset specially designed for IOT projects. Recently I […]
HID Attack Over WiFi Using Arduino MKR1000 Continue Reading
The ESP8266-01 has been a great module to quench all our thirsts for IOT projects. Since its release, it has developed a strong community and evolved into an easy to use, cheap and powerful Wi-Fi module. Another open-source platform which is much more popular is the Arduino, it already has tons of projects built around
Arduino with ESP8266 – Reading Data from Internet Continue Reading
Use Alexa to tell your door sign what message to display. Things used in this project Hardware components Arduino MKR1000 × 1 Waveshare 200×200, 1.54inch E-Ink display module × 1 18650-Type Lithium Ion Battery (generic) × 1 18650-Type Battery Holder (generic) × 1 Breadboard (generic) × 1 Software apps and online services Arduino IDE Amazon
Alexa Controlled Door Sign Demo Continue Reading
Connect your anduinoWiFi to IFTTT. Control everything around you, or ‘let go’ and let random events in cyberspace control your surroundings! Things used in this project Hardware components Arduino Due × 1 Arduino Zero & Genuino Zero × 1 Andium Anduino WiFi × 1 Software apps and online services Arduino IDE Adafruit IO IFTTT Adafruit
Connecting Anduino to IFTTT Continue Reading
The ESP8266 ESP-01 is a module for Wi-Fi that enables microcontrollers to connect to a Wi-Fi network. This module is an independent SOC (System On a Chip) that does not require a microcontroller for managing inputs and outputs like you would typically do with an Arduino, as the ESP-01 functions as a miniature computer. It
Getting Started With the ESP8266 ESP-01 Continue Reading
A couple of years I embarked on my own home automation project. It started off by building a server controlled 433 MHz transmitter build with an Arduino to switch lots of cheap PT2262 based remote switches. Later I added an Arduino based receiver for my weather station, hooked up the control contact of my EV
MQTT and Wifi Powered Mailbox Flag Continue Reading
Some time ago, I tried to make an “Instructables Hit Counter” using the Instructables API, and an Arduino Uno with a wired network shield. However, with the limited RAM of the Arduino Uno, I was unable to get the system to work. A while ago, I noticed a similar project done by diytronics using a NodeMCU. This was just
Instructables Hit Counter (ESP8266-01) Continue Reading
I have a solar power installation using an Omnik string inverter. Omnik is a China based manufacturer of PV inverters and they make extremely efficient devices. Optionally, you can install a WiFi module to make it “connected”. I am very content with the device, with two notable exceptions. It “phones home” to a China based
Omnik Inverter Off It’s Cloud and on My MQTT Continue Reading
WiFi has become an integral part of our life and daily billions of people use WiFi as a method to access the internet. But the range of WiFi is limited, unlike a cellular connection. A normal WiFi router usually has a range of about a 100m in clear sight and about 20m to 50m without clear
Measure Your WiFi Signal Strength Using Particle Photon Continue Reading
This project is to replace the conventional remote control for all the home appliances like AC, TV, DVD players, music system, SMART appliances !!! Making a whole junk of remote littering around, making us puzzle!!! This project will save us from the junk to remotes by replacing all by ONE REMOTE! 2 part of this project: DECODING
Universal Remote Using ESP8266(Wifi Controlled) Continue Reading
